Armor

Bentley Custom Offroad armor is typically custom made, built to your specs and desires. If you see something on the site you like I can certainly make that for you, however, I prefer to make them unique for you.

Let me know what you're thinking of (send me some photos of what you'd like) and I'll come up with options and prices.

If you're interested in ordering anything or discussing a project reach out to me through our CONTACT page and I'll get right back to you. If you call me just leave a message regarding what you're interested in and a good time to call (with time zone) and I'll call you back.

Prices are subject to change (a bit) till the price of steel etc settles down. I try to keep these prices updated so what you see is generally close to what you'll likely pay. Prices can increase though with increasing levels of features and customization. Of course we'll sort that all out before you order so you know what the exact final price will be.

If you have multiple items you'd like me to work on don't hesitate to ask about a multiple order discount. Happy to help you out where I can.

Ladder

Bare steel $225

w Enamel and/or Bedliner $330

w Powdercoating (will get a specific quote)

Front High Clearance Steel Bumper

Bare steel $950 to $1200 (depending on lighting, winch, wing design options)

Enamel Coating $200

Bedliner Spray $300

Powdercoating (will get a specific quote)

Grill Bars $75 extra

Headlight Bars $75 extra

HD 1" thick recovery shackle mounts $50

Rear High Clearance Steel Bumper

Bare steel $950 to $2000 (depending on lighting, hitch, side panel and design options)

Enamel Coating $200

Bedliner Spray $300

Powdercoating (will get a specific quote)

Options

Side Brush Bars $50 extra

Tire Swing Out $450, Second Swing Out frame $400 with dual fuel carrier $200, single fuel carrier $150, integrated ladder $150, Hi Lift Jack mounts $60, Propane Tank bracket $50, HD 1" thick recovery shackle mounts $50, trailer wiring relocate bracket $50

Roof Rack.

Bare Steel $800

Enamel Coating $950

Bedliner Spray $1000

Full length steel basket (less expensive if smaller)

16 ga steel tubing (round or square)

Weight dependent on design

3/16" steel roof mount brackets

Wind Fairing Included

All hardware included

Free installation if picked up here

Shipping approx $350

3/16" steel

Approx 150lbs, swing outs about 50lbs each

All hardware included

Free installation if picked up here

Shipping approx $350

16 ga steel tubing (round or square)

Approx 11-13lbs with all brackets and hardware

All hardware and mounting brackets included

Free installation if picked up here

Shipping approx $80

Solid or Tubing wings

3/16" steel plate, 1/8" tubing

Approx 110 lbs

Winch Plate, fairlead opening and two light port openings included

All hardware included

Free installation if picked up here

Shipping approx $350

Skid Plates

Front, Transmission, Transfer Case. (Inquire about individual skid plate prices)

10 gauge (bit thicker than 1/8")

Bare steel $730

Enamel $800

Bedliner Spray $900

3/16" steel

Bare steel $830

Enamel $900

Bedliner Spray $1000

10ga or 3/16" steel

Mounting Hardware included

Cross support bracket included with transfer case skid

Free installation if picked up here

Shipping approx $200

Gas Tank Skid Plate

10 gauge (bit thicker than 1/8")

Bare steel $400

Enamel $450

Bedliner Spray $500

3/16" steel

Bare steel $450

Enamel $500

Bedliner Spray $600

10ga or 3/16" steel

Mounting Hardware included

Three Hanger brackets included

Free installation if picked up here

Shipping approx $150

OEM Bumper Swingouts

Bare Steel $800 each

Enamel $900

Bedliner Spray $1000

Dual Jerry Can Fuel Carrier add $150

3/16" steel square tubing

Fuel Carrier or Tire Carrier Included

Hinges, stops and latches included and installed

Approx 50lbs each

Welded to Frame

Includes bumper removal, trimming and reinstall

This item can't be shipped as I need to weld the brackets to your frame and build the swingouts out around that

Check out our gallery page for more examples

Since the work I do (mainly for bumpers and swing outs) is usually custom I most often need your rig here to do the majority of the work on it. We can discuss the specifics or alternatives though.

Front Winch Bumper Insert

Bare Steel $750 each

Enamel $850

Bedliner Spray $900

Powdercoating (will get a specific quote)

Grill Bars $75 extra

3/16" steel plate, 1.75" dia 1/8" tubing

Winch Plate, fairlead opening and D-Ring mounts included

All hardware included

Free installation if picked up here

Shipping approx $200

I usually require a 50% deposit to get things going and then the balance when completed prior to shipping or during installation

To enquire about placing an order go to our Contact Page or reach out by email or text me and I'll call or message you back to go over the specifics.

Steven Bentley

steven@bentleycoaching.com

cell 872-252-3685

See bottom of page for order specifics

Shipping estimates by each item are approximate based on recent experiences and to ship across the country. If you pick the item up here near Houston TX there's no shipping and I'll install it on your rig for free.